| Advertisement ID | : | 1045675 |
| Category | : | Lighting / Electricals |
| Location | : | Metro Manila |
| Ads Classification | : | For Sale |
| Regular Price Now Only Save | : : : | |
| Condition | : | Brand New |
| Warranty | : | Shop / Factory Warranty |
| Date Updated | : | November 8, 2009 (posted January 10, 2009) |
| Short URL | : | http://sulit.com.ph/1045675 |
Copy paste the following URL to watch the demonstration video using different models of Power Star power savers:
http://www.youtube.com/watch?v=T48pnzKyTII&feature=channel
Comparison of the performance of 24000 watt against the 18000 on 80 watt load (4 x 20 watt)
http://www.youtube.com/watch?v=ZlhDNPC6ZZw&feature=channel
Comparison of the performance of 24000 watt against the 30000 on 80 watt load (4 x 20 watt)
http://www.youtube.com/watch?v=DUee3y1dmPg&feature=channel
Note:
All the videos were taken in PowerStar Sales Center in Hua Qiang Bei, Shenzhen China. March 8, 2009 around 2:00 PM.
Para sa short understanding kung paano nag wowork ang power saver.
CHT-001 A 18000 watts = 1000.00
CHT-001 C 24000 watts = 1500.00
CHT-001 B 30000 watts = 2000.00
We offer discount to dealers: Minimum order of 10
How it works
The power factor of an AC electric power system is defined as the ratio of the real power flowing to the load to the apparent power and is a number between 0 and 1 (frequently expressed as a percentage, e.g. 0.5 pf = 50% pf). Real power is the capacity of the circuit for performing work in a particular time. Apparent power is the product of the current and voltage of the circuit. Due to energy stored in the load and returned to the source, or due to a non-linear load that distorts the wave shape of the current drawn from the source, the apparent power can be greater than the real power.
In an electric power system, a load with low power factor draws more current than a load with a high power factor for the same amount of useful power transferred. The higher currents increase the energy lost in the distribution system, and require larger wires and other equipment. Because of the costs of larger equipment and wasted energy, electrical utilities will usually charge a higher cost to industrial or commercial customers where there is a low power factor.
Linear loads with low power factor (such as induction motors) can be corrected with a passive network of capacitors or inductors. Non-linear loads, such as rectifiers, distort the current drawn from the system. In such cases, active power factor correction is used to counteract the distortion and raise power factor. The devices for correction of power factor may be at a central substation, or spread out over a distribution system, or built into power-consuming equipment.
If you want further explanation you can PM me for inquiry. I am a Registered Engineer and I can explain how my product work.
Just like the Power Star CHT-001A and CHT-001B
We are once again the first to introduce CHT-001C
Power Star savers improve the power factor of your household / office appliances resulting to a savings of 20 to 30% depending on the type of appliances that you have. It also acts as voltage stabilizer by storing energy up to 10 seconds and therefore supplies the load with constant voltage during momentary power surges, this is in turn results to longer lifespan of the electric appliances.
Specifications:
Rated Voltage = 110 -250 V AC, 50Hz / 60Hz
Working temperature = 15 degree centigrade to 60 deg centigrade
Single Phase Model
Use one Power Star CHT-001A for every 18000 watts.
Installation procedure
Plug this device into a wall socket, not on extension cord or multiple sockets.
When you see the green LED lit it means you are now starting to save energy.
Install one power saver to each meter.
The device must be plugged in firmly. Avoid loose connection.
NOTES
This device operates by adjusting the power factor of the incoming supply into your house. For it to work optimally, it should be installed as close as possible to the point of entry of your electric supply to detect all the loads before the meter and adjust the power factor accordingly. If it is installed too far down into the circuit it will not be able to affect the electricity supply to the other appliances ahead of it.
It works most effective in inductive appliances like motors, transformers, fluorescent lightings, washing machines, water pump and etc.
Reduce wave form distortions
Surge protection
No movable parts
18 months warranty
BTW : ang mga paninda ay ipapadala galing sa Hua Qiang Bei sa Futian District, Shenzhen, PRoC. Kaya naming magsupply ng bultuhan o wholesale.
Please see the Attached Power Point File for Simple Demonstration Taken at Power Star Sales Center in Shenzhen China:
| Posted by | : | huaqiangboi |
| Member Since | : | July 18, 2008 |
| Last Login | : | 2 hours, 52 minutes ago |
| Feedback | : | 1 100.00% [ 1 - | 0 - ] [ Details ] |
| Address | : | Sampaloc Manila, Metro Manila - Manila |
| Contact Nos. | : | 09283201323(smart); |
| Look For | : | Ronnel |
Discussion RSS Feeds ] 
