Subwoofer RE XXX, DD, Fi - BTL, JBL, JL audio Rockford Fosgate, Elemental Design etc.

High End subs for sale.

1pc 18inch Re XXX 2008 model - Retail Price $2,248.99 now P55k optional box see my other for sale item.

http://www.woofersetc.com/p4922/XXX18--RE-Audio-18"-XXX-Series-Dual-2-Ohm-Subwoofer.htm

2pcs. 18inch Fi BTL - Retails at P55 now selling P35K each
This is 1week old. used only for testing. the fully loaded version. includes:

P Chamfer: This is a chamfer on the end of the pole

Cooling: Self explanatory, the cooling channels are machined into the inside of the sub to help cool the coil FAR better. Now if you are looking for a daily sub to beat on and you have 2000+ watts the BTL series is for you.


Flatwind: The flatwire coil option is standard in the BTL.


HiXmCoil: This coil is simply much longer than the normal dual 1ohm or dual 2ohm flatwire coils and allows for more xmax. If you are using this in a daily scenario we suggest that you choose this option, especially in the 15 and 18 inch models.


Inner Heat Sink: Its a machined aluminum ring in the gap that lowers the voicecoils inductance

Daily: is the active option.

Universal: This option gives you the choice to later chance the impedence of your voice coils. You can change from dual 2’s to dual 1’s and vice versa by reconing them. If you do not choose this option your motor(s) will be optimized per the coil resistance that you have chosen. (Dual 2’s will forever be a dual 2 motor, Dual 1 will forever be a Dual 1 motor).

Specs:

Fs: 31.9 Hz | 31.1 Hz

Re: 0.7 Ohms/coil | 1.4 Ohms/coil

Qms: 6.26 | 6.42

Qes: .26 | .24

Qts: .24 | .023

Mms: 313g | 329g

Sd: 1210cm^2 | 1210cm^2

Vas: 163.1 l | 163.1 l

Spl: 94.9dB 1W/1m | 94.9dB 1W/1m

Bl: 18.3 N/A | 27.2 N/A

Xmax: 28mm * | 28mm *

Rms: 2000W * | 2000W *

Sealed box: N/A cuft | N/A cuft

Ported box: 5-10cuft | 5-10cuft

Sub OD: 18.500” | 18.500”

Cut ID: 16.750” | 16.750”

Mounting depth: 10.250” | 10.250”

Displacement: 0.26cuft | 0.26cuft

performance chart of 12inch Fi. 


18inch Fi







15inch SPLW - retail $1200 now selling P10k optional mdf carpeted box add 3k.

NOTE:
this item is negotiable due to repaired torn surround.  item is now 100% incredible working condition.
this can go as much as 150db on my meter easy.

• 15" Dual 1 ohm SPLW Series Subwoofer
• Power Handling:
  • Peak: 2800 watts
  • RMS: 1400 watts
• Impedance: Dual 1 ohm
• Cloth laminated paper cone woofer
• Wide roll treated foam surround
• Die-cast aluminum basket
• Dual CONEX spiders
• One piece rubber gasket
• Aluminum dust cap
• Woven tinsel leads through spider
• Chrome binding post terminals
• Chrome plated front and back plates
• 4" BASV/Kapton hybrid 18-gauge voice coil
• 340oz. Magnet
• Sensitivity: 92 dB
• Very Heavy subwoofer 68lbs.  as heavy as 18inch Fi BTL.

pics here
http://www.sonicelectronix.com/item_13204_SPL+Audio+SPL-W15.html








Elememental Design 13Av.2 is the counter part of JL audio JL13W7 a $1600 killer sub. SOLD!

The both sub has Dual FLEX design is capable of 120+MM or 5inch excursion. imo clone ito ng $350.  ;)
http://www.youtube.com/watch?v=DHov406XuZU
http://www.youtube.com/watch?v=BxgSE3YVKRY




5pcs. Top if the line Performance Tecknique ICBM-5762  - P8k each

all icbm-5762 - Order Basis made in usa.

A must to audition. Hearing / feeling is believing.
almost same as JL-W7 or elemental design 13av2 performance, as heavy as Kicker solobaric 15L7, using same surround used on Rockford Fosgate T2 power series. This sub is sooo under rated.

• Size: 12”  
  
• Max Power: 2500W
• Xmax 3inch
  

Full Aluminum Cone Structure  
High Temperature 2 1/2” 4-Layer Voice Coil
Structural Air Vented Voice Coils   
Kapton Dual Voice Coil: Dual4ohms Coil
Rubber Edge Surround: long throw 3inch wide.
Large Bumped Bottom Plate for Maximum Excursion  
Excellent for Sealed and Bandpass Enclosures  
Magnet Structure: Double  
Frequency Response: 25Hz-500Hz
Impedance Operation Range: 2Ω, 4Ω & 8Ω  
Terminals: Chrome Push in spk terminal
Weight: 35lbs.
MSRP. $300



http://www.performance-teknique.com/Subwoofer-5622.html


Rockford 3rfr3115 sub almost new! SQ/SPL RF aka T2 equivalent power series.  19k.



brand new price still $600

http://www.crutchfield.com/S-IzBKGD1nS18/p_575RFR3115/Rockford-Fosgate-Power-HX2-RFR3115.html?tab=other_items


Voice Coil Diameter-inch (mm) 4" (101.6)


FS (Hz) 22

Welcome to the Main Event! Rockford Fosgate's biggest and baddest subwoofer teems with so much power that its competitors will be lucky to merit a spot on the undercard. In fact, the 18-3/4 pound magnet structure in the RFR3115 alone is heftier than many other subs. And what a wallop this 15" bass slugger packs!

Its FIBERlock treated paper cone handles an awesome 1,000 watts RMS for incredible competition-level thump. For championship-quality strength, the cone is bathed in a special "high solids" solution that ensures it can support the weight of a heavyweight prizefighter! The 2-ohm dual voice coil structure is designed to maximize amplifier performance and provide more system hook-up options. The coils themselves contribute to this woofer's brute force — they are more than 2 inches long, enabling the cone to travel 50 percent further than in Punch HX2 series subwoofers.

The vented plate helps the sub handle temperatures of more than 400 degrees without distortion, while the Santoprene rubber surround withstands all types of adverse weather. In all, it's an amazing blend of sound quality and unadulterated power.

Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible. Most car amplifiers are stable down to 2 ohms in standard mode, or 4 ohms in bridged operation.

Details:

• FIBERlock treated paper cone with Santoprene™ rubber surround
• frequency response 22-400 Hz
• power range 150-1,000 watts RMS (500 watts per coil)
• peak power 2,000 watts
• sensitivity 87.5 dB SPL
• dual voice coil design (two 2-ohm coils)
• top mount depth 7-15/16"
• sealed box volume 1.25 cubic feet
• ported box volume 2.0-4.0 cubic feet

Features

Dual Voice Coils: For increased system flexibility, the woofer has two 4" 2 ohm voice coils. When the voice coils are wired in parallel with each other, the woofer presents a 1 ohm mono load. When the voice coils are wired in series with each other, the woofer presents a 4 ohm mono load. In addition, each coil may be connected to a different amplifier channel and each channel will see a 2 ohm load.

FIBERLock Cone: This new high performance paper stock is a combination of natural and regenerated cellulose fibers interlaced with a third, longer fiber. The three natural fibers are chemically fused together with a blend of three interactive binding agents. The extremely high fibril strength and toughness comes from the combination of all six of these component layers. FIBERLock is light, tough and it's proven to have superior sound quality and incredible durability. The cone is then treated with a Thermally Cured Acrylic Emulsion that seals the cone body for exceptional damping and even greater rigidity, resulting in industrial strength power handling.

BARTSantoprene Rubber Surround: The BART surround has a large roll to assure maximum cone travel. By increasing cone travel, the BART surround allows the woofer to produce more bass. Santoprene is a durable and temperature tolerant rubber material that provides the consistent support needed for linear speaker cone motion. In addition, the damping capabilities of santoprene eliminate the transmission of sonic disturbances between the cone and the frame of the speaker, improving the accuracy of the woofer's low frequency response.

Punch LX Cast Basket: The woofer uses a cast aluminum frame that reduces frame flex and offers increased stability over a stamped steel frame. This frame offers the lowest coloration of sound due to the added strength. To help prevent the spider from hitting the bottom of the basket ("soft bottoming"), the LX Cast basket features a deep step that moves the physical boundaries of the basket further away from the spider; this allows the cone far greater travel and, therefore more bass, without soft bottoming.

Aluminum Formers: The aluminum formers allow the voice coils to efficiently dissipate heat, resulting in improved power handling.

Dual Laminated Progressive Flat Spider: The dual laminated progressive flat spider provides a very strong suspension for the woofer. A secondary spider is fused to the primary spider near the critical voice coil bonding point. The combination of the two spiders, in addition to the progressive rolls in the spiders, provides the ultimate in linear control for high excursion capability.

Hyper-Extended Pole Piece: The pole piece is extended in length to lower distortion and provide better low frequency response by operating the voice coil in a linear fashion throughout its travel in the magnetic field.

Punch LX Long Xmax Voice Coils: The L-xtended winding coils allow the voice coil to stay in the magnetic gap longer, resulting in less distortion and more control. Combine the L-xtended coil with the hyper-extended pole piece and the result is a huge magnetic sweet spot and deeper, louder, cleaner bass.

Vented Bumped Back Plate: The back plate has been bumped to allow the woofer more room for excursion without bottoming out. Additionally, "Aerovent" cooling efficiently and quietly circulates cool air around the voice coil using a back plate that is vented with a radiused aerodynamic back vent. By keeping the voice coil cooler, power handling is improved.

Rubber Magnet Boot: A black rubber boot covers the exposed edge of the magnet structure to improve the cosmetics of the woofer and protect the magnet during installation. The rubber boot looks great when the woofer is mounted in an enclosure with a window that allows you to see the back of the woofer.

CONsealer Gasket: A newly designed front gasket conceals mounting screws and provides an airtight seal between the woofer frame and the mounting surface. A better seal increases the amount of bass due to the elimination of air leaks.

Binding Posts: The woofer has two sets of 5-way platinum binding posts, one set for each voice coil. The binding posts will accept banana plugs, dual banana plugs, spade connectors, pin connectors and bare wire.

Enclosure Compatibility: This woofer can provide extended bass in sealed and ported enclosures (see the "Specifications" section for more information on enclosures).

Specifications

Recommended Sealed Box Volume: Rockford Fosgate recommends a 1.25 cu/ft sealed enclosure.

Recommended Ported Box Volume: The ported box volume range recommended by Rockford Fosgate is 2.0 cu/ft to 4.0 cu/ft. Within this range, the ideal size recommended by Rockford Fosgate is 2.5 cu/ft, so this is the enclosure recommended by Crutchfield. One 4" diameter x 8" long port, tuned at 35Hz, should be used with a 2.5 cu/ft enclosure.

Power Handling: The woofer has two 2 ohm voice coils, and each coil can handle up to 500 watts RMS (1000 watts peak).

QTS 0.388
VAS-cu.ft. (liter) 4.45 (126)
Xmax-inch (mm) .74 (19)
SPL (dB @ 1w/1m) 87.5
Power Handling (RMS) 1000
Power Handling (Max) 2000
46lbs.
MSRP: $800



8inch pioneer - Sold out
Standby for more stocks.



B/N 12" Subwoofer 2009 model JBL GT5-S12 - P2.750 each


================================================

This are real folks. Bigger, better, stronger...
Limited stocks only. so hurry bili na.


top view


back view



side view



New BIG high end features:
* Rubber coated tinsel leads
* 2inch tougher high temp voice coil
* Double large slugs magnets w/ rubber boot
* High excursion bigger rubber surrounds
* Ultra large 7" 1/2 long excursion conex spiders
* Visible voice coil from see thru vent windows
* Thicker stronger metal basket
* Stiff, none flex, light weight polypropylene cone material

2009 / 2010s Model GT5-S12 JBL GT Series High Power Subwoofer MSRP: P3500   For anyone who likes to crank it up in the car, the new JBL 12" high-output GT5-S12 subwoofer is the real deal. The JBL GT5-S12 subwoofer features a single 4-ohm voice coil and a vented motor structure, and offers 1200 watts of peak power handling. The GT5-S12 also features JBL's newest design, combining classic elements with modern ones. The high-end subwoofer will replace the JBL GT5-12 model. • All-new design: The GT5-S12 follows the design of the more-expensive JBL subwoofers, combining classic elements with modern ones. • Significantly improved power handling capabilities: The GT5-S12 handles as much as 300W/1200W (RMS/Peak) power. • Increased reliability: With its fully vented motor structure and rubber-coated tinsel leads, the GT5-S12 is able to withstand even the most intense bass assault. • Dual-stacked, oversized magnets: Unlike competing entry-level subwoofers, the GT5-S12 is based on a solid motor structure featuring two large magnets covered by the classic JBL rubber ring.        OTHER VIEWS:


SPL enclosure click here:
http://www.sulit.com.ph/index.php/view+classifieds/id/1301929/Home+Theater+/+Car+subwoofer+SPL+enclosure+for+Kicker+MTX+Rockford+Fosgates+subwoofer%2C+marcopilyo+amps

LOCATION MAP of my demo place. ( green roof ) X mark the spot.



Buendia corner FB harrison. its only 3mins away WTC - World Trade Center.
or
5mins away to Gil Puyat station LRT.

check out the landmarks of 7eleven. and Petron gas station.




Related forum link.

The reviews...
http://tipidpc.com/viewtopic.php?tid=103257&page=1
http://tipidpc.com/viewtopic.php?tid=88759&page=101


Contacts:
Cell  09179888768 or 5253845 / 7762095 marco landline calls must be 2pm onwards.
USA voip 7162404202
Yahoo instant msg.  -->  marcopilyo

Txt msg is required for confirmation.

Click image thumbnail to view actual image size [ Get Image / Link Embed Codes ]