Midiman MicroMixer 18

9 VAC ADAPTOR INCLUDED

18 1/4" INPUTS

2 1/4" SENDS

2 1/4" AUX

STEREO 1/4" OUTPUTS

HEADPHONE JACK

Great small line tabletop or rack mixer, particularly good for mixing
multiple MIDI
synth modules, drum modules or mics, etc..

The Midiman MicroMixer 18 has 12 inputs with gain control, pan control, 2
sends per
channel and an LED clipping indicator. These inputs provide up to 20dB of
gain. The
remaining 6 channels (numbered 13 through 18) are configured as 3 unity gain
stereo
pairs with inputs 14, 16 and 18 going to the right output, and inputs 13, 15
and 17 going
to the left output.

Both Send 1 and Send 2 provide up to 6dB of post-fader gain over Channels 1
to 12.
There are also 2 returns; 1 mono return and 1 stereo pair. Return levels
are controlled
by the MONO RTN and AUX RTN Left and Right level controls. If not using the
returns,
they can be used as additional unity gain inputs.

Left and right output signals are also routed to a stereo headphone amp,
which has its
own level and right volume controls.

The Master Level controls provide up to 20dB of additional gain. Since
clipping doesn't
occur until approximately +20dB and the noise floor is at -95dB, the
MicroMixer 18 has a
S/N ratio of well over 100dB.

This unit makes for a very handy mixing expander, or submixer, or keyboard
module mixer.
It's quiet, clean, and straightforward to use.

Click image thumbnail to view actual image size [ Get Image / Link Embed Codes ]