Elid EL1300 Door/Gate Security System

EL1300 is designed for residential or small establishments requiring basic access security at low cost. It can function in stand-alone mode, using a PIN entry keypad for programming, or up to 64 units can be networked together and controlled using EsofWIN, a PC-based Access Management Software.

This particular configuration handles two doors/gates and comprises:

• EL 1300 Controller (2 units) with transformer & back-up battery
• Proximity reader (2 units)National brand push-buttons (4 units)
• One-way intercom (2 units)
• Locking device (2 units)
• EL 702 Communicator
• Esofwin software for windows (PC not provided)

Original price was Php 94,000 plus 15,000 installation. Swipe cards approx. 100Php each

Advanced Design
	EL1300 uses the reliable microcontroller, with firmware stored in Flash Memory. The firmware can be updated in-circuit through serial download from PC.
	Reliable Operation
	EL1300 is equipped with a real time clock backed up by a lithium battery. Time will continue to be recorded even during power failure. Essential equipment settings, card database and transaction database are stored in EEPROM.
	Wide Choice of Reader and Card Formats
	EL1300 accepts magnetic card reader (F2F) signals and Wiegand (Data0/1) signals. A wide range of formats are catered for, such as ABA format, 26 bit Wiegand format, and free Wiegand format, where users can specify selected fields such as Card ID number and facility code.
	Times Zones
	EL1300 provides 10 time zones (categories), each with 8-day schedule (7 weekdays + holiday), with 2 start-stop periods assigned to each day. Up to 20 holidays can be programmed beforehand. Automatic Time Zones are provided for unlocking doors or selecting Card+PIN mode at specific periods.
	Keypad Unit
	EL1300 can be connected to a keypad unit (EK9S or EK6S) which provides 12 numeric keys, and 4 digits of 7-segment display. This keypad unit is used when a PIN code is required to be entered, as when EL1300 is operated in PIN Code only mode or Card+PIN mode. In addition, this keypad is used for programming when EL1300 is not connected to a PC (stand-alone mode). Where the alarm monitoring function is used, the keypad also acts as the arming, disarming and output control terminal.
	Power Supply
	EL1300 comes with battery-charging and a power regulation circuit. The input power requirement is 15VAC, and a lead-acid battery can be connected to the charger output. In addition, AC power failure and battery low status sensing are built-in.
	Database
	EL1300 provides following storage capacity: