Sale: YAESU FT-8800R Dual-Band VHF/UHF Mobile Base Radio FREE SHIPPING icom

The Yaesu FT-8800R dual bander operates on 2 meters and 70 centimeters. High power output is featured with 50 watts on 2 meters and 35 watts on 430 MHz. It is like having two radios in one with dedicated Volume and Squelch controls on each side. Built in features include: duplexer and CTCSS/DCS Encode/Decode. Over 1000 memories are available. It is WIRES compatible.

The FT-8800R features Yaesu's ARTS™ Auto-Range Transponder System, important in search-and-rescue applications. ARTS provides a "hand-shake" with other ARTS equipped transceivers and displays out of range or in range. A six character CW ID is also provided for your station every ten minutes during ARTS operation. The FT-8800R comes with a mobile mounting bracket, DC cord and MH-48A6J Up-Down, illuminated DTMF microphone.

Amateur Mobile Transceivers

FT-8800R Specifications GENERAL   Frequency Range Receive: 108-520 and 700-999 MHz (cellular blocked). Frequency Range Transmit: 144-148, 430-450 MHz Frequency Steps: 5/10/12.5/15/20/25/50 kHz Operating Modes: F3, F2, F1 Antenna Impedance: 50 Ohm, Unbalanced Antenna Jack: SO-239 [U.S.A. version] Frequency Stability: ±5 ppm -4°F to 140°F (-20°C to +60°C) Supply Voltage: DC 13.8V ±15%, Negative Ground Current Consumption: Receive Squelched - Less than 0.5 A   TX HI 0 144 MHz 8.5 A 0 430 MHz 8.5 A Operating Temperature Range: -20°C to +60°C (-4°F to +140°F) Case Size: 5.5x1.6x6.6 inches (140x42x168 mm) Weight: Approx. 2.2 Lbs (1.0 kg) 0 TRANSMITTER   RF Power Output: 50/20/10/5 Watts (144 MHz) 0 35/20/10/5 Watts (430 MHz) Modulation Type: Variable Reactance Maximum Deviation: ±5 kHz Spurious Radiation: -60 dB or better Microphone Impedance: 2 K Ohm Data Jack Impedance: 10 K Ohm 0 RECEIVER   Circuit Type: Double-Conversion Superheterodyne Intermediate Frequencies: 45.05 MHz & 450 kHz (Left band) 0 47.25 MHz & 450 kHz (Right band) Sensitivity (12dB SINAD): <0.2uV Selectivity: 12 kHz/30 kHz (-6/-60 dB) Squelch Sensitivity: Better than 0.16uV AF Output: 2W @ 8 Ohm @ 5% THD AF Output Impedance: 4-16 Ohm (Internal Speaker 8 Ohm)   Specifications are subject to change.

The Yaesu FT-8800R has front panel access to WIRES™ - Wide-Coverage Internet Repeater Enhancement System. Since WIRES™ was announced at the 2002 Dayton Hamvention, the system has evolved into a much more versatile system, known as WIRES™-II.

WIRES™-II is a technique of using Internet Voice Networking technology to link two repeaters or home stations, across a county or across a continent, thus allowing users with a hand-held or mobile transceiver to communicate over long distances. Nonproprietary DTMF signalling is used to establish the Internet link. WIRES™-II has several unique features and operating modes that set it apart from other linking systems already in the marketplace:

(1) The HRI-100 Interface, which is the electronic part of a WIRES™ node, connects to a personal computer (using Windows® 98SE or later OS), and that computer may connect either to a high-speed (DSL/ISDN/T1, etc.) or a regular dial-up (56 kbps) Internet connection. The HRI-100 comes with AP01 Software on CD, data cable and audio cables (requires 12 VDC @ 1 amp). Click here to view wiring.

(2) The SRG (Sister Repeater Group) operating mode allows paging of any WIRES™ node (repeater or base station) within a pre-arranged closed group, using a single DTMF digit for access. Depending on how you configure your node, you may send this DTMF digit once, at the beginning of the initial linked transmission, or you may elect to require the sending of the DTMF digit at the beginning of each linked transmission (thus allowing you to make on-the-fly switch to a local transmission, if you like).

(3) The FRG (Friends' Repeater Group) operating mode involves a worldwide assortment of repeaters and base stations that have configured their nodes to get calls from any other WIRES™ node. Similar in concept to IRLP, the FRG mode has the additional capability of Group Calling of up to ten other nodes, using a single DTMF digit, a feature that might be of tremendous benefit to emergency groups. To make a regular FRG call, you press [#] then five more DTMF digits, depending on the I.D. number of the node you are calling.

(4) Plug-and-play interconnections to FT-8800R allow a WIRES™-II node to be created in a matter of minutes. Yaesu has interconnection instructions for a number of popular repeater controllers.

WIRES™-II Internet Linking System Requirements:
• HRI-100 Interface with APCD-ROM Software, Data Cables, Audio Cables
• Compatible UHF Transceiver or Repeater
• Intel MMX200 MHz CPU or faster
• An Internet connection (56K dial-up, ISDN, DSL, etc.)
• Microsoft Windows 98SE or later operating system
• 30 MB of Hard Drive space
• 64 MB or RAM (or more)
• CD-ROM Drive
• Monitor with 640 x 480 color with 256-bit color support on video card
• Modem (for dial-up connections)
• Sound Card with 44.1 kHz sampling rate (some cards may not work).

MSRP: P 18,000

Payment: Bank deposit thru BPI or Banco de Oro

For Buyers with zero or negative feedback, e-mail me before bidding. Thank You!

For More Info, Contact: X-treme Outdoor Outfitters (0927 750 7667) GLOBE

NOTE: The buyer shall be responsible in securing all legal licenses with the National Telecommunications Commission (NTC).

*** Photos shown are just mere representation. Actual unit is Sealed in the Box, NEVER Been Opened.

YOU MIGHT ALSO LIKE:

Brand-New, Sealed in Box, Original ICOM (Japan)

ICOM 2200H, Sale Price: P 7,995 + FREE SHIPPING

ICOM IC-V8000, Sale Price: P 9,495 + FREE SHIPPING

YAESU FT-2800M, Sale Price: P 7,495 + FREE SHIPPING

ICOM IC-V85, Sale Price: P 7,495 + FREE Shipping

ICOM IC-V82, Sale Price: P 6,295 + FREE SHIPPING

ICOM IC-V8, Sale Price: P 5,495 + FREE SHIPPING

YAESU VX-170, Sale Price: P 6,295 + FREE SHIPPING

Also Available:

Diamond Antenna CP22, F-22, F-23A, F-23H

Steady Volt Power Supply, 15A, 20A, 30A, 50A with or without Battery Charger

ZEBRA POWER SUPPLY, 15A, 20A, 30A, 50A with or without Battery Charger

*** FREE SHIPPING anywhere in the Philippines

Contact: 0927 750 7667 or (065) 212-7467