Asterisk IP-PBX FXO/FXS Module Card - 100% Asterisk Compatible Card

Norwell Engineering is offering Asterisk IP-PBX module card compatible for FXO and FXS.
Our card is available from 1-Port FXO/FXS to 16-Port FXO/FXS.

Contact us:
Address: Manila,Philippines
Telephone: +632 564.11.15 look for Arnold
website: http://www.norwell-asterisk.com
email: sales@norwell-asterisk.com

 Click to Call
FWD # 916631

100% Asterisk Compatible...!

ANALOG & Digital Trunk Card (E1,ISDN,T1)...

NES-1600P

NES-1600P is a 16 analog port PCI card that support up to 16 FXO and FXS channels. Using NES-1600P PCI card, open source Asterisk PBX and PC, users can create their SOHO telephony solution including all the sophisticated features of traditional PBX, and extend features such as voicemail in IP PBX.

User can use NES-1600P with standard Zaptel device driver and Asterisk source code. The FXO and FXS module are interchangeable to suit various requirements.

FEATURES
Fully support Asterisk
16 RJ11 interfaces via expand RJ45-RJ11 converter
16 ports for connecting analog telephones or POTS lines
PCI 2.2 compliant
8 single FXO/FXS modules or 8 dual FXO/FXS modules

NES-400P

NES-400P is the Asterisk compatible PCI card that support up to four FXO and FXS combination interfaces. Using NES-400P series PCI card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution include all the sophisticated features of traditional PBX, and extend features such as voicemail in IP PBX.
User can use NES-400P with standard Zaptel device driver and Asterisk source code without modify any code. The FXO and FXS module are interchangeable to suit various
requirements.

FEATURES:
Suitable for SOHO PBX application.
Voice mail.
IVR.
Caller ID and Call waiting Caller ID.
Conference.

SPECIFICATION

Configuration:
Module:
Motherboard: NES-400P
FXS module: NES-110S
FXO module: NES-110X.
Hardware Requirement:
500-Mhz Pentium III or better with 64MB RAM
Available PCI Slot 5v

NES-100P

NES-100P is a single port FXO PCI interface card for capturing a standard analog phone line into your Linux server with Asterisk PBX software. The AX-100P supports FXS Loopstart and "Kewlstart" (Loopstart with far end disconnection supervision).

It can detect ringing and remote hangup and fully supports Pseudo-TDM bridging through Zaptel. The device is fully supported by Asterisk PBX for both incoming and outgoing calls.

FEATURES:
1. 100% compatible with Digium's X100P card.
2. Be detected as "X100".
3. CallerID / BusyTone detection.
4. Suitable for SOHO PBX / VoiceMail / IVR.
5. Timming device for trunck / conference / MusicOnHold.
6. Starter device to study Zaptel / Asterisk.
7. Low cost channel for Fax server / Fax On Demand.

SPECIFICATION:
>FXO
Loopstart
Kewlstart
>Interface:
1XFXO port
5.0V PCI interface

Click image thumbnail to view actual image size [ Get Image / Link Embed Codes ]