[Item Sold!] HARMAN KARDON AVR 300 DTS /DOLBY DIGITAL

[Item Sold!]

AVR 300
50 Watts x 5, AM/FM, Dolby® Digital, DTS® A/V Receiver
SPECIFICATIONS: Surround System Adjacent Channel Separation
Pro Logic® Decoding : 40dB
Dolby® Digital : 55dB
DTS® : 55dB
Amplifier Section
Stereo Mode
Continuous Average Power (FTC) per Channel : 60 watts per channel @<0.07% THD, 20Hz - 20kHz, both channels driven into 8 ohmsSurround Modes Continuous Average Power (FTC) per channel : 50 watts per channel @<0.07% THD, 20Hz - 20kHz, all channels driven intStereo Mode
Continuous Average Power (FTC) per Channel : 60 watts per channel @<0.07% THD, 20Hz - 20kHz, High Instantaneous Current Capability (HCC) : ±35 amps
Input Sensitivity/Impedance, Linear (High-Level) : 250mV/47kOhms
Signal-to-Noise Ratio : 95dB
Frequency Response at 1W (+0dB, –3dB) : 10Hz - 100kHz
Transient Intermodulation Distortion (TIM) : Not Measurable
Rise Time : 16μsec
Slew Rate : 40V/μsec
FM Tuner
Frequency Range : 87.5 - 108MHz
Usable Sensitivity : IHF 1.3μV/13.2dBf
Signal-to-Noise Ratio : 70dB
Signal-to-Noise Ratio, Stereo ( measured at amV RF Input Level) : 68dB
Distortion (Mono/Stereo) : 0.3%/0.3%
Stereo Separation : 40dB @1kHz
Selectivity : ±400kHz, 65dB
Image Rejection : 80dB
IF Rejection : 90dB
Tuner Output Level : 1kHz, ±75kHz Dev 500mV
AM Tuner
Frequency Range : 520 - 1710kHz
Signal-to-Noise Ratio : 45dB
Usable Sensitivity : Loop 500μV/M
Distortion : 1kHz, 50% Mod 0.8%
Selectivity : ±10kHz,30dB
Video
Television Format : NTSC
Input Level/Impedance : 1Vp-p/75ohms
Output Level/Impedance : 1Vp-p/75ohms
Video Frequency