Popular MBC Power Savers!

Would you pay for a glass of beer that contains half liquid and half bubbles? Pay for the size of the glass instead of the liquid you get to drink? That is similar to what you experience with appliances that have poor power factor.

Power Factor is the ratio between power that is used and power that is supplied. It’s a measure of how efficiently electricity is used. That is the amount of liquid with bubbles you pay for ‘vs’ the amount you get to drink.

If your Power Factor is below 1.00 you are paying for power you are not using. Power factor correction ensures that you get a full glass every time.

Doesn’t it make sense to eliminate this extra waste from your power bill today?

- Reduce electrical power loss by up to 35% and more
- Increase the power factor of inductive appliance
- Prolong the life of electric equipment by 1.5 times
- Improve quality of electricity supplies. Make stable and safe.
- Save up to 35% and more on electricity expense, results will vary.
- Save up to 35% of expense on electricity bill
- Easy to use and no wiring needed. Just plug and start saving.
- Prolong your electrical appliances life span and maintenance cost.
- Enhance quality of electricity supplies.
- Reduce temperature of wire.

How it works
Stabilizes voltages and reduce currents, enhances power efficiency of electric equipment, avoid waste of the supplies, save electrical energy and extend the life of appliances.

The Power Saver can recycle the lost electrical power caused by wire loss and extra electrical power wasted by starting and running equipment, as it then releases the recycled electrical power back into the electrical circuit to reuse it to save power and to save your money eventually.
The Power Saver also helps to stabilize voltages and reduce currents in your power supplies. It improves the power factor by reducing the amount of electricity that is used from our utility company. This is accomplished by supplying electricity locally at the load by the use of specially designed capacitor. This advanced capacitor stores the additional electricity needed for stabilizing electric current within an inductive load.

Therefore, the amount of electricity purchased from our utility company by a power factor optimization has been greatly reduced and resulting in power savings for our home or office.
Extra electrical power can also be lost naturally when being transmitted (call wire loss) or at the instant of turning on the electrical appliances.

Power Saver does not consume electricity itself if used together with inductive appliances. But when used alone, without other appliances working, it may consume very little energy. Remember, there must be “power” to be saved. That is the function of the power saver. It is safe to plug it 24×7 and just leave. However, when there is no other appliance plugged, it is wiser to unplug the power saver.

Power Saver is suitable for inductive and capacitive appliances (except capacitor-run appliances), such as air conditioners, refrigerators, washing machines, stereos, fluorescent lamps, electric fans, televisions, etc.

TEXT ME NOW! :)

THIS IS A ONCE IN A LIFETIME SALE SO GO AHEAD AND GET YOURS NOW AND SAVE ELECTRICITY.