WTB: auto body repair and painting tools

I'm planning to start an auto body repair and painting shop in bulacan. I am in need of tools to use in my shop. power tools, cutting tools, welding tools, painting tools. I am also looking for dealers of supplies that I will need for the painting. Paints, bondo, body filler, putty, sandpaper, tape. please feel free to post your offers. and please indicate your contact number.

I prefer 2nd hand tools that are still reusable. must be in good condition and with a fare price. Much better if their is a particular shop that will no longer operate and wants to sell all of their tools, we can arange something that would benefit both parties.

I have a partial list of tools that I need:

POWERTOOLS
1 OXY/acetylin outfit- cutting and welding
1 Angle grinder
1 Orbital sander

TOOLS
1 Rollaway tool cabinet with locking drawers (no larger than 41”W x 25”D x 43”H) with a minimum wheel size of 5”.
For optional tool cabinet see Optional Tools
1/4” Drive Set – To Include:
1 set 1/4” drive shallow sockets (6 point) (10 sockets 3/16” through 9/16”)
1 set 1/4” drive deep sockets (6 point) (10 sockets 3/16” through 9/16”)
1 2” extension
1 4” extension
1 5” ratchet
1 set Metric shallow sockets (4 mm through 14 mm)
1 set Metric deep sockets (4 mm through 14 mm)
3/8” Drive Set – To Include:
1 set 6 point sockets, shallow (11 sockets 1/4” through 7/8”)
1 set 6 point deep sockets (1/4” through 7/8”)
1 set 6 point metric shallow sockets (6 mm through 19 mm)
1 set 6 point deep metric sockets (6 mm through 19 mm)
1 1” extension
1 6” extension
1 12” extension
1 8” extension
1 Universal joint 3/8 drive
1/2” Drive Set – To Include:
1 Ratchet 10” min.
1 5” extension
1 set Socket shallow (7/16” through 1 1/8”)
1 set Socket deep (7/16” through 1 1/8”)
1 set Metric socket (12 mm through 24 mm)
1 Breaker bar 18” min. length

Combination Wrench Sets:
1 set Long combination wrench (1/4” through 1”)
1 set Long metric combination wrench (6 mm through 19 mm)

Screwdriver Sets:
*1 set Screwdrivers (8 piece) (standard tip 1/4” x 2”, 3/16” x 3”, 1/4” x 4”, 5/16” x 6”, and 3/8” x 8”)
*1 Phillips tip (#1 and #2)
*1 Phillips stubby (#2) (Snap-on SDDX80)
1 Torx bits ( T10, T15, T20, T25, T27, and T30)

Pliers
1 Common pliers (6”) slip joint
1 Needle nose 6”
1 Diagonal cutter 7”
1 Vise grip Irwin pliers (#10” WR No Substitutions)
1 Vise grip Irwin welding clamp (#9 U No Substitutions)
1 Vise grip Irwin welding clamp (#18 RC No Substitutions)

1 set Hammer
1 set dolly

Miscellaneous Tools and Equipment
1 Wide vision welding helmet (lens 4 1/2” x 5 1/4”) (lens shade #10)
1 Putty knife
1 Punch and chisel set (6 piece) [Mayhew 751K]
1 Door striker and seat belt socket (Torx #50 3/8 drive)
1 Metal finishing file blade (new, not a re-sharp)

1 Adjustable handle for body file with attaching screws in handle (for above tool)
1 Circuit tester, 12 volt test light with insulated cup
1 Door spring removal tool [Cornwell SM-21910]
1 set High speed drill bit (21 piece 1/16 through 3/8)
1 Tire air chuck (1/4 – 18 female NPT)
1 Tape measure US and metric (10’ and 300 cm)
1 Safety lever blow gun (up to 150 PSI)
1 Welder torch lighter
1 Torch tip cleaner (victor or equivalent)
1 Sanding block ( 5” x 2 3/4”) [3M #05519]
1 17” Speed Board (Hutchins non-flex) [AF-16 part No.5502]
1 17” Speed File (Hutchins) [PF – 16 flex]
1 Trouble light
1 Flashlight 2 D cell battery (with batteries)
1 set Allen wrench US (10 piece 3/32” through 3/8”)
1 set Allen wrench metric (11 piece 2 mm through 12 mm)
6 Dixon nipple DCP2502 (1/4 x 18 NPT male 3/8 ID)
3 Dixon nipple DCP2622 (1/4 x 18 NPT female 3/8 ID)
1 Air coupler Dixon C26 (1/4 x 18 NPT female 3/8 ID)
1 Plastic mixing pallet and 3 spreaders
1 3M Roloc pad assembly [3M #5540]
1 Windshield trim removal tool [Cornwell SM-2150 orequivalent]
1 Upholstery tool [Snap-on A1613 or Lisle 35400]
1 Windshield cold cut-out tool [Kepsco #SH77374 orCornwell SN77377]
1 Hacksaw rigid adjustable (12” blade)
1 Gasket scraper [Craftsman 9-43292]
1 Windshield hook (Craftsman 94319, Snap-OnA1734A)
1 Wire end brush 1/4 arbor (used in drill)
1 Hand wire brush [Anderson #AN43001 or equivalent]
1 pair Welding gloves full length HD insulated
1 Caulking gun [3M #8993 or New Born model 250 - No Substitutions]
1 Face shield with adjustable headband and visor (with
clear and dark shields)
1 Ball peen hammer 32 oz.
1 Air hose 50’ long 3/8 ID (good rubber, not plastic)
1 Body pick (18” long, 9/16 stock) [Snap-on BF767B]
1 Tin snips [Wiss 1 M1R Red Left]
1 Tin snips [Wiss 1 M2R Green Right]
1 Rubber gloves (1 pair for use with solvents)
1 Step drill bit (Unibit #UN1, 1/8 through 1/2 by 1/32)
1 Hearing protectors [Morse #M1320 or equivalent]
1 3/8 drill (air or electric)
1 Full face respirator with filters [3M 6800 No Substitutions]
1 Air powered cut-off tool [Ingersoll #IR326 orequivalent]
1 Body hammer, cross chisel (finishing hammer)
1 Body hammer, utility pick (short pick)
1 Body hammer (long pick)
1 General purpose dolly
1 Toe dolly
1 Safety glasses [Z-87]
1 Utility knife with blades
1 50’ electric extension cord HD
1 Rat tail file (8” x 5/16” round)

PAINTING
1 Paint gun (gravity feed 1.7 nozzle)
1 Air regulator (diaphragm) with dial gauge (for above
paint gun)
1 Pistol grip air grinder (5” disk x 14,000 rpm) [Blue Point AT 425E]
1 Dual action sander with 6” pad (for 3M sticky paper)
1 set Air hammer with 5 chisels [Cornwell CP-7110 K or equivalent]
1 Bastard file (8”)
100 Pair of large latex gloves [MACNO Sempermed Nitrile # INIPT – 104 CarQuest SAS 6508]
1 Wire Splicing tool

Optional Tools:
1 Tool cabinet (58” W x 24” D x 39” H) NO SIDE BOX TO BE ADDED
1 Top tool chest with locking drawers
1 Side box for rollaway tool cabinet

1 Buffer with 7” backing plate (electric or air with regulator) no orbitals
1 Sata “Jet” Gravity Feed Gun or equivalent