Cisco 2950 24 Ports

C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)

Compiled Mon 22-Jul-02 17:18 by antonino

WS-C2950-24 starting...

Base ethernet MAC Address: 00:12:01:d6:66:c0

Xmodem file system is available.

Initializing Flash...

flashfs[0]: 326 files, 5 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 7741440

flashfs[0]: Bytes used: 5596160

flashfs[0]: Bytes available: 2145280

flashfs[0]: flashfs fsck took 8 seconds.

...done initializing flash.

Boot Sector Filesystem (bs:) installed, fsid: 3

Parameter Block Filesystem (pb:) installed, fsid: 4

Loading "flash:c2950-i6k2l2q4-mz.121 22.EA13.bin"...##################################################################################################################################################################################################################################### [OK]

File "flash:c2950-i6k2l2q4-mz.121-22.EA13.bin" uncompressed and installed, entry point: 0x80010000

executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco Internetwork Operating System Software

IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA13, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2009 by cisco Systems, Inc.

Compiled Fri 27-Feb-09 22:20 by amvarma

Image text-base: 0x80010000, data-base: 0x80680000

Initializing flashfs...

flashfs[1]: 326 files, 5 directories

flashfs[1]: 0 orphaned files, 0 orphaned directories

flashfs[1]: Total bytes: 7741440

flashfs[1]: Bytes used: 5596160

flashfs[1]: Bytes available: 2145280

flashfs[1]: flashfs fsck took 8 seconds.

flashfs[1]: Initialization complete.

Done initializing flashfs.

POST: System Board Test : Passed

POST: Ethernet Controller Test : Passed

ASIC Initialization Passed

POST: FRONT-END LOOPBACK TEST : Passed

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco WS-C2950-24 (RC32300) processor (revision Q0) with 20957K bytes of memory.

Processor board ID FOC0838Z0HR

Last reset from system-reset

Running Standard Image

24 FastEthernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 00:12:01:D6:66:C0

Motherboard assembly number: 73-5781-13

Power supply part number: 34-0965-01

Motherboard serial number: FOC08380QUP

Power supply serial number: DAB0836G4YU

Model revision number: Q0

Motherboard revision number: A0

Model number: WS-C2950-24

System serial number: FOC0838Z0HR

--- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: n

Press RETURN to get started!

Switch>en

Switch#sh env all

FAN is OK

Internal POWER supply is OK

RPS is NOT present

Switch#sh ver

Cisco Internetwork Operating System Software

IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA13, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2009 by cisco Systems, Inc.

Compiled Fri 27-Feb-09 22:20 by amvarma

Image text-base: 0x80010000, data-base: 0x80680000

ROM: Bootstrap program is C2950 boot loader

Switch uptime is 2 minutes

System returned to ROM by power-on

System image file is "flash:c2950-i6k2l2q4-mz.121-22.EA13.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco WS-C2950-24 (RC32300) processor (revision Q0) with 20957K bytes of memory.

Processor board ID FOC0838Z0HR

Last reset from system-reset

Running Standard Image

24 FastEthernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 00:12:01:D6:66:C0

Motherboard assembly number: 73-5781-13

Power supply part number: 34-0965-01

Motherboard serial number: FOC08380QUP

Power supply serial number: DAB0836G4YU

Model revision number: Q0

Motherboard revision number: A0

Model number: WS-C2950-24

System serial number: FOC0838Z0HR

Configuration register is 0xF

Switch#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Switch#sh int fa 0/1

FastEthernet0/1 is up, line protocol is up (connected)

Hardware is Fast Ethernet, address is 0012.01d6.66c1 (bia 0012.01d6.66c1)

MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

Keepalive set (10 sec)

Full-duplex, 100Mb/s, media type is 100BaseTX

input flow-control is unsupported output flow-control is unsupported

ARP type: ARPA, ARP Timeout 04:00:00

Last input never, output 00:00:00, output hang never

Last clearing of "show interface" counters never

Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: fifo

Output queue: 0/40 (size/max)

5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

0 packets input, 0 bytes, 0 no buffer

Received 0 broadcasts (0 multicast)

0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

0 watchdog, 0 multicast, 0 pause input

0 input packets with dribble condition detected

112 packets output, 9706 bytes, 0 underruns

0 output errors, 0 collisions, 2 interface resets

0 babbles, 0 late collision, 0 deferred

0 lost carrier, 0 no carrier, 0 PAUSE output

0 output buffer failures, 0 output buffers swapped out

Switch#sh flash:

Directory of flash:/

2 -rwx 112 Mar 01 1993 00:24:19 +00:00 info

3 -rwx 3721946 Mar 01 1993 00:26:57 +00:00 c2950-i6k2l2q4-mz.121-22.EA13.bin

4 drwx 4416 Mar 01 1993 00:27:54 +00:00 html

328 -rwx 112 Mar 01 1993 00:28:29 +00:00 info.ver

329 -rwx 315 Mar 01 1993 00:32:06 +00:00 env_vars

330 -rwx 1132 Mar 01 1993 00:34:08 +00:00 config.text

331 -rwx 5 Mar 01 1993 00:34:08 +00:00 private-config.text

Switch#more flash:info

image_name: c2950-i6k2l2q4-mz.121-22.EA13.bin

image_file_size: 3727360

image_min_dram: 16

tar_file_size_k: 2017

Up for sale is a Cisco Catalyst 2950 24 Port with Standard Image installed with Crypto and Web Based Device Manager Support... it comes with :


* New Power Cord.
* New Console Cable to configure the switch.
* New Mounting Brackets.
* Newest IOS Image for this Switch which it is c2950-i6k2l2q4-mz.121-22.EA13.bin, with crypto support.

The switch is in mint condition, excellent physical, cosmetic and working condition, tested by a CCNP, which it's me... All ports are tested and working, and the Fan is clean and smooth... It is ideal for small to medium business as an Access Layer Switch, and any candidate pursuing the CCNA, CCNP or even CCIE... price is still negotiable, just text me or call at 09175367970 and ask for Mr. Sherif... Pickup will be in Salcedo Village, Leviste St., Makati City.

Features of the installed IOS :

Address Resolution Protocol (ARP)
AutoQoS - VoIP
CDP (Cisco Discovery Protocol) Version 2
Clear Counters Per Port
CLI String Search
Commented IP Access List Entries
Configurable IGMP Leave Timer
DHCP Auto Install with Saved Configuration
DHCP Client
DHCP Snooping
DHCP Snooping Counters
Enhanced Password Security
ErrDisable Reactivation Per Port
ErrDisable timeout
EtherChannel
EtherChannel - Flexible PAgP
Fast EtherChannel (FEC)
FTP Support for Downloading Software Images
HTTP Security
IEEE 802.1Q VLAN Trunking
IEEE 802.1W Spanning Tree Rapid Reconfiguration
IEEE 802.1x - Auth Fail VLAN
IEEE 802.1x - VLAN Assignment
IEEE 802.1x - Wake on LAN Support
IEEE 802.1x Authenticator
IEEE 802.1x Guest VLAN
IEEE 802.1x RADIUS Accounting
IEEE 802.3ad Link Aggregation (LACP)
IGMP Fast Leave
IGMP Snooping
IGMP Throttling
Interface Range Specification
IP Named Access Control List
Jumbo Frames
Link Aggregation Control Protocol (LACP) (802.3ad) for Gigabit Interfaces
Multicast Etherchannel Load Balancing
NAC - L2 IEEE 802.1x
Network Time Protocol (NTP)
Packet-Based Storm Control
Parse Bookmarks
Port Security
RADIUS
Reduced MAC Address Usage
RMON events and alarms
Secure Shell SSH Version 1 Integrated Client
Secure Shell SSH Version 1 Server Support
Secure Shell SSH Version 2 Server Support
Smart Port
SNMP (Simple Network Management Protocol)
SNMPv2C
SNMPv3 (SNMP Version 3)
Spanning Tree Protocol (STP)
Spanning Tree Protocol (STP) - Backbone Fast Convergence
Spanning Tree Protocol (STP) - Loop Guard
Spanning Tree Protocol (STP) - Portfast
Spanning Tree Protocol (STP) - Portfast BPDU Guard
Spanning Tree Protocol (STP) - Root Guard
Spanning Tree Protocol (STP) - Uplink Fast Convergence
Spanning Tree Protocol (STP) - Uplink Load Balancing
Spanning Tree Protocol (STP) Extension
Standard IP Access List Logging
Standby Supervisor Port Usage
Support for 4096 VLAN IDs
Switch Port Analyzer (SPAN)
Tacacs Single Connection
TACACS+
Time-Based Access Lists Using Time Ranges
Trusted boundary (extended trust for CDP devices)
Unicast Mac Filtering
UniDirectional Link Detection (UDLD)