TLP Battery Charger (Slightly Used)

TLP TL15 IntelliCharger
Model No: TL15-TLP (NiMH & NiCAD)

Slightly used Intelligent charger. Good for RC or Airsoft hobbies and for home use. Comes with DC connectors for car input as well as terminal for large and small tamiya battery plugs.

Extra guide/table on how to use the charger.

Features
-With 4 Digit LCD, display output V, output A and mAh capacity.
-Charging 3000 Ni-MH battery at up to 5.5A.
-Charge 1-10 Cells at 0.5A-5.5A; Charge 11-15 Cells at 0.5A-3A.
-High frequency PWM switching up an down technology.
-Peak detector smart circuit with MOSFET pulse linear current for Ni-cad or Ni-MH to 100% without overcharging.
-Lightweight Power-Switching technology unit and smart compact case design.
-Reverse Polarity protection system.
-Auto detect system for input source:100V-240V AC or 12V car battery.
-Discharging current is 4A, built-in cooling fan.
-Latest software for peak charge, discharge, FUZZY LOGIC and three cycles functions.

OPERATION
To operate the charger with AC input:
-Connect AC power cord of the charger to the AC outlet.
-The power lamp of the charger will turn on.

To operate the charger with DC input:
-Disconnect the AC power cord.
-Connect DC input wire (with crocodile clip) to the DC input terminal of the charger. 
-Make sure the red clip is connected to the positive terminal of the 12V battery and the black clip to the negative terminal.
-The power lamp of the charger will turn on.