| |
| Advertisement ID | : | 1753392 |
| Category | : | Other Items |
| Ads Classification | : | For Sale |
| Condition | : | Brand New |
| Warranty | : | Shop / Factory Warranty |
| Date Posted | : | November 8, 2009 |
| Short URL | : | http://sulit.com.ph/1753392 |
| Chinese-made electronic tilt sensor Model:XXJ6-LE-60 | Item: |
| Electronic Tilt Sensor Product Description: 1. Features 1. Inclination Sensor SHT6-LE-60 through the silicon micro-machined sensor measurements to horizontal axis as the reference plane inclination changes. 2. Data Communication RS232 interface and an optional duplexer 485. 3. The level of instruction through the serial port calibration of zero inclination. 4. Shell structure, waterproof, anti-outside interference ability. 二. Product Description SHT6-LE-60 is a dual-axis tilt sensor, by measuring the static acceleration of gravity changes into changes in inclination. Measuring the output of the sensor relative to the horizontal angle of tilt and pitch. Built-in temperature compensation automatically correct sensor temperature drift. The angle sensor response speed from 3 times / sec -20 times / sec adjustable. Built-in shock suppression mode, relying on the speed difference in approach reflects the distinction between shock and vibration and the inclination change. Electronic Tilt Sensor 三. Specifications 1. Conventional model, the main indicators (power = +12 V) Output speed of 3 times / sec -20 times / sec Adjustable units Dual-axis measuring range ± 15, ± 30, ± 45, ± 60, ± 90, an optional degree of Resolution ± 0.01 (optional precision 0.001) degrees Accuracy (<± 30 °) <± 0.1 (optional precision 0.01) degrees Accuracy (<± 60 °) <± 0.3 ° Non-linear ± 0.1% Repeatability ± 0.05 ° Temperature drift 0.01 ° / ℃ Electronic Tilt Sensor 2. Other indicators The smallest unit of the normal maximum Operating voltage 5.5 9 15 V Operating Current 50 55 60 MA Serial data format 9600, n, 8,1 BPS * Operating temperature -40 +80 ℃ 3. Operating parameters limits Minimum Maximum Unit 5 18 V supply voltage Operating temperature -55 +100 ℃ 四. Output data format Inclination Sensor SHT6-LE-60 power-on work, waiting for orders, command format and output format is as follows: 1. Send a command format: Bytes of data on the location of meaning 1,2 header 0xAA 0xAA 3 data length 0x04, inter alia header data length 4 sensor address 0Xxx 232 address output mode 2 5 command 0x01 command output data frame 6 efficacy of the different characters in front of all the data or results 2. Receiver Output format: Explain the meaning of data type byte position 1,2 header 0xAA, 0xAA 3 Frame Size bytes of data among all but the length of header 4 address byte 0Xxx (232 output mode address 2) 5 bytes received orders to return to the command word to return 6,7 reservations 8,9 reservations 10,11 X-axis angle of the angle integer = integer / 100 (unit: degrees) * 12,13 Y-axis angle of the angle integer = integer / 100 (unit: degrees) To retain the internal temperature of 14 integer (error ± 3 degrees) 15 parity bytes in front of 14 bytes of data, or efficacy results of different * Note Description: Standard double-byte integer, the maximum bit = 0, indicating a positive number, the maximum bit = 1, indicating a negative number. 五. Command table, and the command explaining the (test product temporarily there is no such command) command shows the meaning of the word 0x01-0x05 set the output speed of 0x01 corresponds to 20 times / sec 0x05 corresponds to 5 times / sec 0xa0 send a single output for each output of the command 0xa0 time data, power-down state of preservation 0xa1 continuous output to send an 0xa1 command, the data set the response speed in accordance with continuous output 0xb6 point of a zero calibration plane placed at any angle sensor 0xb7 angle calibration 2 at the 12:00 plane back 180 degrees to place sensors 0xb8 preservation point of view 12:00 parameter modification of the absolute angle sensor installed flat (the standard level surface after calibration measurement axis in the error range) 0xd0 X point of 0:00 set in the non-horizontal surface to set the relative angle X-axis 12:00 0xd1 Y 12:00 to set the angle is set in the non-horizontal plane angle of zero Y-axis relative 0xd2 12:00 to set a relatively clear clear 0xd1, 0xd2 command to set the zero 0xf1 16 hex mode output of above command are valid under 16 hex mode 0xf0 Ascii mode output of sub-ways to an external voltage converter board Electronic Tilt Sensor 六. XS12J7C K7ABR55 7-pin socket with waterproof socket, socket wiring is defined as follows: Plug Pin No. Name Description 1 GND input power to 2 +15 V input supply cathode 3 Y 4 Z 5 B 6 A 7 NC ban Connection 7. Inclination Sensor Shell Machine size: (optional non-shell) Shell Size: rectangular, length 90mm, width 60, a high 30mm. | Electronic inclination sensor made XXJ6-LE-60![]() |
| Posted by | : | maia1980 |
| Member Since | : | October 9, 2008 |
| Last Login | : | 1 hour, 3 minutes ago |
| Feedback | : | no feedback yet |
| Address | : | Beijing China |
| Contact Nos. | : | +8613901136645, 09085675878 |
| Look For | : | Midwest Group |
Discussion RSS Feeds ] 
