Powercraft by HYL Industrial Plasma Cutting Machine 70 amp Philippines

PLASMA ARC CUTTING

OXY/FUEL CUTTING

Metals

Plasma cuts any electrically-conductive metal (steel, aluminum, copper, stainless steel, etc.) from very thin (<3/8 in.) up to 2in.

Oxy/fuel cuts ferrous (iron-containing) steels up to 24 in. thick.  Metals such as aluminum and stainless steel cannot be cut with Oxy/fuel due to the formation of an oxide that prevents oxidation from fully occurring.

Industries

Common in metal fabrication, construction, agricultural, maintenance, automotive repair, metal art, sculpting, home, hobby and DIY applications.

Agricultural, fabrication, construction, maintenance repair, mining, automotive, hobbyists, DIY applications

Preheating

Not required

Required

Productivity

Plasma cutting works exceptionally well on thinner materials (<1/2 in.), depending on the output of the power source. It can also cut stacked material and works well on expanded metals. Prep time is minimal with no preheating requirements. Produces a small and precise kerf (cut) width. Features a small heat-affected zone that prevents warping and damage. Cleanup is rarely needed as dross is cleanly blown away. 

Oxy/fuel is capable of efficiently cutting metals up to 24 in. thick. It is not dependent on a primary power source. Fuel gas and nozzle design options enhance performance.  

Portability

Portability varies based on technology, size of power source and size of air tanks (if not using a built-in air compressor). Many units can work efficiently in the field off of engine-driven generators and a variety of primary power sources thanks to primary power management technologies offered in some plasma cutters.

Highly portable and is not dependent on a primary power source – capable of cutting anywhere with gas tanks and torches.

Versatility

Stack cutting, beveling, shape cutting, gouging and piercing of metals is possible with plasma cutters. 

With a combination torch, oxy/fuel systems can be used for heating, brazing, soldering, welding,gouging, riser cutting and bending metals.

Safety Concerns

(Operated properly, each tool is safe and effective. Improper use can lead to the following problems.

Electrocution, fires started by sparks, arc flash to the eyes, cutting in and around combustible materials, damage to protective clothing, skin and tissue if used improperly. Always wear appropriate clothing.

Flashbacks, fires started by sparks, cutting in and around combustible materials, damage to protective clothing, skin and tissue if used improperly. Always wear appropriate clothing.