Pano malalaman kung ano yung memory na ipapalit sa desktop pc? Philippines

duda ako na DDR3 ang RAM mo... usually mga lumang PC, DDR o DDR2 yan
kung di mo mamasamain, ibigay mo ang brand ng motherboard ng CPU mo
o kaya Brand and Model ng PC.

Need mo check ang Type ng RAM then yung speed ng RAM na compatible sa PC mo.

@violin, sundin mo si jack tama yan...

There are two ways. Pili ka nalang:

a) Mag install ka ng CPU-Z utility... (igoogle mo nalang) :)
Makikita dun ALL specs ng PC mo pati narin ung Type and Speed ng Memory mo.
SDRAM, DDR1, DDR2, DDR3

b) Hugutin ang memory. (be careful)
Tingnan mo ung sticker na nakadikit sa memory. Nakasulat dun kung anung type ng memory gamit mo.

tama to.. bagaman kadalasang ddr at ddr2 ang mga luma... depende pa rin sa identification natin ng luma.. ^_^ meron last year lang luma na para sa kanila.. ^_^ 

1. Just remove your present memory card

may mga latch iyan sa sides that you need to pull slowly

2. then bring this to gilmore or v-mall

show this sa mga stores duon para malaman mo exactly what type your memory card is

3. then canvass for a higher memory card

 

try to note down also your mother board, kasi some mother boards can only accept up to 2gb of memory

patay ang memory mo pag di ka maingat. ensure you have ESD strap. otherwise, you are obviously taking a risk. You'll know what I mean pag di na gumana memory mo pag install mo ulit. Dont believe in tsambahan lang or diskarte. Memory are very sensitive. As in very ! hope it helps.

try to scan your memory using this http://www.crucial.com/index.aspx

power off your pc, unplug it, open it, and notice there is this long array of small squares with lock on each side usually near to where this big fan is seated, remove it and take it to computer shop..

Download speccy. It's free and will tell you everything you need to know about your system.

All the previous post are really great, I'll just share with you guys that you can try to look on the RAM slot if may nakasulat na 2.5v usually its DDR1 if 1.8 DDR 2 na po.